| Max.Head: | >150m |
|---|---|
| Max.Capacity: | >400 L/min |
| Driving Type: | Motor |
| Impeller Number: | Multistage Pump |
| Working Pressure: | Middle Pressure Pump |
| Influent Type of Impeller: | Single Suction Pump |
| Samples: |
|---|
Suppliers with verified business licenses
Product Type - Series description
SXP rotary jet pump (pitot tube pump) is through the pump body and impeller at the same time rotating centrifugal pressurization, and then through the pitot tube secondary energy rotation
A new type of small flow, single stage high head pump, which is a very low specific speed pump; It works with high speed pumps, more
Compared with stage pump and plunger pump, it has the advantages of simple structure, less wearing parts, low maintenance cost, high efficiency and energy saving.
Parameters:
Applicable flow range: 1.0 ~ 40m³/h
Applicable head range: 80 ~ 1800m
Maximum design pressure: 26MPa
Application field description:
This series of pumps are suitable for conveying clean, free of particles, neutral or weakly corrosive media, if used
Used in transportation of crude oil and fuel oil, boiler replenishment, condensate water recovery, high pressure washing, hydraulic cutting,
Reverse osmosis filtration and other high pressure transmission occasions.
Product characteristics
1.small flow, high lift
by pump body and impeller rotating centrifugal supercharging at the same time,
Then through the pitot tube secondary energy conversion and pressurization, from
And achieve high head pump body and impeller rotating at the same time, the disc friction almost
2.Zero, high efficiency
has simple structure, low cost
only two rotating parts, less wearing parts, in a very Greatly reduce the possibility of equipment damage
high universality and interchangeability of the components, spare parts Low inventory and low cost
minimum continuous flow is small, use less return line
3.high flexibility
can be realized by adjusting the rotational speed, the operation parameterschange can replace pitot tube specifications, control flow,Large adjustment range
4.smooth operation, no pulsation
pitot tube finish process of kinetic energy into pressure energy,Steady output, no pulsationrotor radial force and axial force is small, the bearing loadLoad stabilization
5. device for high safety
machine seal arrangement at the inlet low pressure area, and pumping pressure
Dielectric isolation reduces the risk of leakage shaft out of contact with the media, without shaft seal leakage risk
double shell to assure the safety of the device
6. seal reliability
machine seal arrangement at the inlet low pressure area, maximum limit Prolong the service life of the seal
compared with high-speed pump parameters, lower speed, increasedThe reliability of the sealseal choice
Scope of application:
This series of pumps is suitable for conveying clean, does not contain particles, neutral or weak corrosive media; At present, it has been used in industry
Materials are: boiler feed water, ammonia, acetic acid, methanol, urea, cyclohexanol, alcohol ketone, NMP solvent, naphtha, isobutane,
Xylene, gasoline, acetone, polyisopropylbenzene, condensate oil, diethanolamine, liquefied petroleum gas, ammonium bicarbonate liquid, liquid ammonia, etc.
acetone hydrogenation unit
high-pressure spray device
VCM (vinyl chloride) device
seal flush system
reverse osmosis filtration system
food industry center cleaning system
condensate pump used for short fiber
1.Coupling head
Side in and side out/side in and side out Implement standard for flanges
✓ HG/T 20592 ✓ HG/T 20615 ✓ GB/T 9124 ✓ SH/T 3406 ✓ ASME B16.5
2.Pitot tube
Model preparation for different working conditions
Preparation for airfoil design to reduce liquid flow resistance to pitot tubes
3.Sealed cavity
Preparation for single end mechanical seal Preparation for lumped single end mechanical seal
Preparation for double end mechanical seal Preparation for packaging double end mechanical seal
4.Lubrication mode
Preparation for standard thin oil lubrication on oil dump trays Preparation for compulsory lubricating oil station
5.Bearing configuration
Preparation for back-to-back Installation of a diagonal contact ball bearing to balance axial force
Preparation for high pressure preparation at entrance, 3~4 groups of angular contact bearings in series are adopted
The combination balances the axial force
Preparation for heavy duty deep groove ball bearings
6.Bearing box
Preparation for simple structure and integral casting
Constant position oil cups prepared on container preparation for automatic oil level compensation
Cooling method
✓ the air is cold
Water cooling
Preparation for vibration and temperature measurement hole preparation for intelligent monitoring
Transmission mode
7.Belt pulley drive
Preparation personnel for frequency direct connection
Preparation box transmission
Coupling transmission
Suppliers with verified business licenses
){kind=link}
){kind=link}