| Customization: | Available |
|---|---|
| Max.Head: | >150m |
| Max.Capacity: | >400 L/min |
|
Still deciding? Get samples of US$ 1000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product type-description:
The vertical submerged pump (suspended, single-shell, long-shaft driven oil sump pump) is called the VS4 pump.
The VS4 submerged pump is generally used in clean, corrosive, and chemical fluid transfer applications, and its immersion length in the container is generally not more than 7 meters. Our company's pump models include SLY, FYL, and SDY.
VS4
The outlet diameter of SLY type pump is generally less than 200mm, and the extension length is generally 5.5m Within. Two speeds: 2900r/min and 1450r/min. Flow Q: ~ 500m3/h,Lift H: ~ 120m, closed impeller structure, bearing box for 2 pairs of thrust ball bearings ,Bearing radial and axial forces, sealing forms are: mechanical seal, packing seal, V-ring Seal it. On this basis, SLG type high temperature liquid pump is derived, with both support pipe and outlet pipe .With thermal insulation jacket structure, which is characterized by high temperature resistance, easy to transport crystalline liquid,Shaft seals are generally packing seals.
Parameters:
Standard:API610
SLY Capacity:~500 m3/h SLG Capacity: ~3700m3/h
Head: ~120m Head: ~250m
Pressure:~2.5MPa Pressure:~2.5MPa(steel), ~1.6MPa(cast iron)
Temperature:-20ºC ~+125ºC Temperature:300ºC ~600ºC
RPM(50HZ) Speed:2900r/min, 1400r/min, 980r/min
The series of pumps adopts special design, can be used for the transportation of various media in various kinds of harsh conditions;it also can be used to transport normal or high temperature liquid near open mouthed sump pit or closed pressure vessel.
Cross-section Diagram:
1.With bearing seat, easy to adjust axial position of the rotor;grease lubricated bearing structure;this structure is simple, safe and reliable.
2.External flushing pipe,external clean medium is used to flush sliding bearing,which makes bearings run in good lubrication condition.
3.Seal chamber does not contact with the pump.Packing seal,mechanical seal can be selected according to user requirements to choose in order to prevent volatile gas of the medium spilling over.
4.Multi-point supporting sliding bearing structure;the bearing spacing conforms to the API610 requirements.
5.Discharge pipe is VS4 structure;no pressure medium between support column and the seal.High hydraulic efficiency .
6.Thread,sleeve spindle structure: high coaxial degree, accurate positioning, reliable transmission torque.
7.Self-flushing line, pumping medium from pump outlet flushes sliding bearing, pumping medium is required to be clean and has a certain lubricity to ensure bearing lubrication.
8.Pump body is designed as 1.6~2.5MPa, the inlet can be connected to the filter, the pump to filter media.The inlet can be connected with filter net, and the pumping medium is filtered.
){kind=link}